Sheet Metal Brake & Metal Bender

Round dies: 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/2" and 3" 5/8" Round or square solid rod capacity 5/16" x 1-1/4" or 1/4 x 2" Mild Steel Flat Stock...

Bends mild sheet steel up to 12 gauge (2 mm) Maximum bend width: 36" Bend angle capacity: 0 - 120 degrees Includes stand Operating and assembly in...

Metal Alloy Construction 3/4" Thin Wall 1/2" Rigid 2 Bubble Levels Bend Position Marks at: 10, 22, 30, 45, 60 and 90 degrees

Bends 1/2" to 3" Thick Round or Square Solid Rods Bending Bars Can Be Adjusted From 8-1/2" to 27" Jack Capacities: 13-1/4" Minimum, 22-3/4" Maximu...

Diameter Range: 1/4", 5/16", 3/8" Marked Degrees Gauge Accurate Angles to 180 Degree Bends aluminum, copper and steel tube

High quality steel construction Easily makes up to 90 degree bends Bends material up to 30" Bends material up to 17 gauge mild sheet steel Designe...

7 Dies, 7 Rollers, Base, Clamp and extending handle Bends round pipe and tubing (Outer diameter): 3/8" (radius 2"), 1/2" (radius 2 3/8"), 9/16" (r...

Bend angle, roll, hoop, coils in wrought iron, mild steel, brass, copper, aluminum Scroll bending plate Work hold vise 17" handle 9 x 9 tapped bas...

Bends 1/2" to 2" Thick Round or Square Solid Rods Bending Bars Can Be Adjusted From 8-1/2" to 22-1/4" Jack Capacities: 13-1/4" Minimum, 22-3/4" Ma...

Bend width: 48" Brake Range: 0 - 135 degrees 3" Max. Pan/Box height Mild Steel: 16 ga. half width - 18 ga. full width Aluminum: 11 ga. Brass / Cop...

Three functions in one: Shear, Brake and Roll 12" wide capacity Maximum capacity in mild steel: 22 gauge Roll diameter: 1-1/2" Approximate shipp...

Material width capacity: 24" Material thickness capacity: 20 gauge mild steel The removable and adjustable fingers can be installed in a variet...

Hardened, precision fingers for long life Material width capacity: 48" Material thickness at full width: 14 gauge mild steel Material thickness at...

Bend, twist and roll wrought iron up to 1-1/4" X 1/4" rectangular and 3/8" square or round stock Complete set of jigs for bending wrought iron i...

Bends 1/8, 3/16, & 1/4" outside diameter of brass, copper, steel or aluminum tubing Compact for close quarters applications Bends 90 degrees a...

Bends copper, brass and other soft thin wall tubing For tubing up to 5/16" Durable Easy to use

Makes short, smooth radius bends up to 180 degrees Calibration gauge to indicate angle of bend For copper, aluminum and thin wall tubing 3/8" maxi...

Stand for Cheek Bender

Optional Stand for 30" Cleat Bender

Stand for 30" Bar Folder

Optional Stand for Box and Pan Brake

Puts 7/32″ flange on elbows and other radius fittings.Available from a distributor near you. Normally in stock in one of our warehouses. Bench moun...

Tin Knocker offers 8′ sheet metal brakes of 16 gauge capacities. These are industrial quality brakes, the kind you use over a lifetime. Another Tin...

GREAT FOR CROSS BREAKING DUCT! Bending Length: 6 Feet Capacity: 22 Gauge Mild Steel Beam Lift: 1 1/4" Box or Pan Depth: 2" (3 Sides) Includes Bolt...