Dust Collection Fittings and Adapters

Flanged connector makes adding a 2-1/2" dust port to any machine easy Simply cut a 2-3/4" diameter hole and mount the connector Flange diameter ...

Connect 4" hose to 2" hose Ends are 4" OD and 2" OD. Tapered transition for maximum efficiency Heavy wall thickness stands up to hose clamp pres...

Mount 2-1/2" to 6" blast gates to any solid surface Provides blast gate stability for ease of use Simple blast gate attachment Includes mountin...

T-fittings provide the option of adding branches to a system to service each machine in a shop. T's are very helpful when space or design constrain...

Used to connect full sections of hose for longer runs or to utilize short sections 3" Outside Diameter ABS Plastic

Provides a step down from a larger main line to smaller branch lines which increases air velocity near the machine where it's needed most 5" &...

Reduce from 4" hose to 2-1/4" OD hose Off center alignment keeps dust from collecting in the system Heavy wall thickness stands up to hose clamp...

Reduce from 4" hose to 2" OD hose Low profile design ABS Plastic

Size: 2-1/2" OD Connect hose sections for longer runs Fits most larger shop-vacuum type hose for use as a stationary dust collection system ABS ...

Flanged connector makes adding a 4" OD dust port to any machine easy Simply cut a 4" diameter hole and mount the connector Flange diameter is 5-...

We engineered the inside diameter of the 2-1/2" side of each of these fittings to duplicate the 2-1/2" opening on your shop vacuum. Insert the shop...

Blast gate directs air flow for multiple machine duct systems Fits most larger shop-vacuum type hose for use as a stationary dust collection syst...

This 3" Quick Coupler make dust collection set-up easy. 3" OD dust collection hose 3" ID dust collection fitting.

Tapered female end for press-on fit Threaded end fits 4" flexible hose Ideal for quick connection to 5" machine dust ports

Angled Y provides less air resistance than a 90 Degree Tee fitting 2-1/2" x 2-1/2" x 2-1/2" OD Fits most larger shop-vacuum type hose for use as...

Reduce dust collection hose from 2-1/2" to 1" OD in 1-7/8", 1-1/2" and 1-1/4" OD steps Simply cut off what you don't need Flange measures 2-7/8"...

Swivel Joint provides flexibility in duct layout 4" OD x 4" OD hose connection Swivel design allows up to 20 Degree direction change ABS Plastic

Increase air velocity by reducing from 4" OD to 2-1/2" OD Tapered ends for press-on fit

This 4" OD Splice Right Thread To Taper fitting make dust collection set-up easy 4" dust collection hose 4" dust port Eases dust collection set-up

Step-down increases air velocity near the machine where it's needed most 4" & 3" Outside Diameters ABS Plastic

Elbows are necessary whenever ductwork changes direction, such as from a dust collector to an overhead main line, or when connecting individual mac...

Connects full sections of hose for longer runs or to utilize short sections 4" Outside Diameter ABS Plastic

Increases air velocity near the machine where it's needed most 3" and 2" Outside Diameters ABS Plastic

Attach to a 4" flexible hose and connect to 4" outer diameter dust hood Ideal for use with smaller capacity, mobile dust collectors to service mul...