Power Saws

4-5/8" Diameter 2-3/4" Wide Synthetic Rubber Feeder Roller Wheel Made in an ISO 9001 factory For W1767, W1768 & W1769 Powerfeeders.

4-5/8" Diameter 2-3/4" Wide Synthetic Rubber Roller Wheel Made in an ISO 9001 factory For W1767, W1768 & W1769 Powerfeeders.

120 volt, 60 Hz, 1.1 amp, 1725 RPM motor Variable Speed (No Load): 400 to 1600 SPM Laser Guide For More Accurate Cuts LED Work Light Brighten...

5HP, 220v, Single-Phase, TEFC, 1725 RPM Balanced Cast Iron Wheels w/ Rubber Tires 14" Maximum Cutting Height 20" Throat Capacity 165" Blade Length...

Fits W1767 Shop Fox 1 HP Power Feeder Diameter: 4-5/8" Width: 2-1/4" Arbor: 25mm ~ 1" Distance between pin holes: 50mm ~ 1.925" Synthetic Rubbe...

For hunters, farmers, ranchers, homeowners, non-commercial users Grinds meat: 44 lbs. an hour Cutting throat: 9-7/8" x 9-7/16" Belt drive 3/4 HP, ...

Motor: 1/8 HP, 120V, 0.6A Variable speed motor Blade speed: 550-1600 SPM Max cutting thickness: 2-1/4" Max. cutting width: 16" Cast-aluminum table...

Motor: 1/6 HP, 115V, 1.2A Variable speed motor Blade speed: 550-1600 SPM Cast-iron table Max. cutting thickness: 2" Max. cutting width: 18" Cast-i...

Motor: 1 HP, TEFC, 110V/220V, single-phase, 1,725 RPM Amps: 14 110V, 7 220V Blade size: 93-1/2" (1/8" to 3/4" wide) Blade size w/ extension block...

1-1/2 HP, 220v, Single-Phase, 1725 RPM Variable Frequency Drive Speed Control 12" Maximum Cutting Height 17-1/2" Throat Capacity 133" Blade Le...

Motor: 1/2 HP, 220V, 4 Amp Number of speeds: 4 Range of speeds: 9.5, 15, 25, 38 FPM Wheels: 3, synthetic rubber, 2" W x 4" Diameter Rotation: forw...

Power, capacity and extra features make this 19" Heavy-Duty Bandsaw the saw of choice for many serious woodworkers Once again, we've pulled out a...

Motor: 2 HP, 110V/220V, single-phase, TEFC capacitor start induction, 60 Hz, prewired 220V Amps: 20 110 / 10 220V RPM: 1725 Precision ground cast...

Motor: 3/4 HP, 110V, single-phase 1,725 RPM Max. cut (round stock) Diameter: 4-1/2" Max. cut (rectangular stock): 4"x 6" Blade speeds: 78 FPM 4...

Motor: 5 HP, 230V, single-phase, TEFC, 3450 RPM, 19 Amp Blade tilt: 0° - 45° Table size without extension wings: 27"L x 14-3/8"W Table size wit...

1/2 HP, 110V/220V, Single-phase, 60 Hz, 1720 RPM Amps: 7 @ 110V, 3.5 @ 220V Drive: V-belt Transmission: sealed worm gear Max. capacity rectangular...

Motor: 1 HP, 110V/220V, single-phase, prewired 110V Blade size: 93" x 3/4" Max. capacity circular @ 90°: 7" Max. capacity rectangular @ 90°: 7"...

Includes the following useful accessories: 2 Clamps 1 Rail Connector 1 Flip Stop 1 Stabilizer

Wide right angle design for maximum accuracy and support Easy single locking cam action lever Adjustable fence wear pads Magnified cursor lens ...

Wide right angle design for maximum accuracy and support Easy single locking cam action lever Adjustable fence wear pads Magnified cursor lens ...

Braced support legs provide added strength and rigidity Wide right angle design for maximum accuracy and support Simple mounting procedure for m...

Motor: 1/4 HP, 120V, 2.5 Amp Number of speeds: 4 Powerfeeder Range of speeds: 20, 26, 33, 43 FPM Wheels: 3, synthetic rubber, 1-1/8" W x 3-1/16...

The perfect after-market upgrade for SHOP FOX Aluma-Classic Fence owners that want to increase their rip capacity with longer rails. Easy to install

Makes milling and ripping of longer or wider stock easy, accurate and safe Motor: 1/8 HP, 110V, 1.2 Amp Variable peed: 6-1/2 - 39 FPM Wheels: 3, s...