Air Tools

Retracts to 1/3 its full length 2-1/2" diameter 10 Feet Hose

Controls air flow from one machine to another Maximizes system efficiency Textured surface and an easy sliding gate action 6" Outside Diameter AB...

Fits over a 6-1/2 inch X 6-1/2 inch chute Attach with screws or double-sided tape 4" Outside Diameter 3/4" Wide Flange ABS Plastic

5" Diameter Used to connect flexible piping to dust hoods, blast gates and fittings Wire

5" Diameter Steel Bands Connect flexible piping to dust hoods, blast gates and fittings Adjust size with a screwdriver

Engineered to duplicate the opening on your shop vacuum. Insert the shop vacuum hose directly to the fitting. The outside diameters match our stan...

Controls air flow from one machine to another Maximizes system efficiency 4" Outer Diameter Cast Aluminum Body Steel Gate Locking Knob

3" Diameter Steel wire Used to connect flexible piping to dust hoods, blast gates and fittings

3" Diameter Steel Band Used to connect flexible piping to dust hoods, blast gates and fittings

Reduce from 2-1/2" hose to 1-1/4" OD hose Tapered sides for friction fit

2-1/2" OD blast gate directs air flow in machine ducting 2-7/16" OD, 2-1/8" ID Gate position can be secured with lock knob

Hose clamps are used to connect flexible piping to dust hoods, blast gates and fittings. 2-1/2" Diameter Steel Band

This 1/4" NPT female plug is made of solid brass construction and resists corrosion 1/4" NPT

This Quick Connect Coupler has a male 1/4" NPT end. All brass construction. 1/4" NPT

This barbed hose end and your hose clamp make a secure threaded connection. 3/8" ID barb hose Great for salvaging air hose with broken ends

110V/60Hz 6.5 HP Motor Vertical Tank Belt Driven No Load Speed: 3, 450 rpm Maximum Pressure: 125 psi Displacement: 6.5 CFM This item must s...

Average Air Consumption:4.2 -7.1 CFM Cup Capacity: 600cc Nozzle Size: 1.4 mm Fluid Delivery : 180-250mm Air Pressure:2.0-3.5 bar Air In...

Precision tool gives more control over air pressure for more efficient air tool operation Place between air supply source and air tool for insta...

Heavy Duty Construction 3/8" Drive Paddle Trigger Maximum Torque: 45 FT-LB. Maximum speed: 150 RPM Air Consumption: 4 CFM Air Inlet 1/4" NPT

Drive: 3/4" Square, Long Shank Bolt Capacity: 1" Max torque: 500 FT-LB Air Consumption: 12 cfm @ 90 psi Max. speed: 4, 800 rpm Air I...

Locking pressure regulator with gauge 1000 ml aluminum paint cup Spray pattern control knob on side of guns Non-bleeder type, gravity feed externa...

Locking pressure regulator with gauge 1000 ml aluminum paint cup Spray pattern control knob on side of guns Non-bleeder type, gravity feed externa...

Includes locking pressure regulator with gauge 1000 ml aluminum paint cup Spray pattern control knob on side of guns Air Inlet: 1/4" Operating Pr...

Steel Construction Includes: (1) 1/4" NPT Female (For "A" Style, "M" Style, and "T" Style)