Lathes, Jointers & Routers

Used to make full beaded edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. 5,000- 10,000 RPM. A = 2-5/8 In...

Used to make fluted edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A = 2-5/8 Inch Cutter Diameter B = ...

Used to make quarter rounded or beaded edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. 5,000- 10,000 RPM....

Used to make quarter rounded or beaded edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. 5,000- 10,000 RPM....

Used to make full beaded edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. 5,000- 10,000 RPM. A = 2-5/8 In...

Used to make quarter rounded or beaded edges 5,000- 10,000 RPM A = 2-5/8 Inch Cutter Diameter B = 7/16 Inch Cutting Length r = 1/4 Inch Radius ...

Used to make full beaded edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. 5,000- 10,000 RPM. A = 2-5/8 In...

This panel cutter is used to make a 12 degree face cut with a Quarter Round on 5/8 inch panels alone, or 3/4 inch panels when combined with our DC2...

This panel cutter is used to make a 12 degree face cut with a Quarter Round on 5/8 inch panels alone, or 3/4 inch panels when combined with our DC2...

This panel cutter is used to make a 15 degree face cut on 5/8 inch panels alone, or 3/4 inch panels when combined with our DC2300 or DC2325 undercu...

Used to make quarter rounded or beaded edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. 5,000- 10,000 RPM....

Used to make full beaded edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. 5,000- 10,000 RPM. A = 2-5/8 In...

Used to make fluted edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A = 2-5/8 Inch Cutter Diameter B = ...

Used to make quarter rounded or beaded edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. 5,000- 10,000 RPM....

Used to make full beaded edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. 5,000- 10,000 RPM. A = 2-5/8 In...

Used to make 30 degree bevel edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A = 3 Inch Cutter Diameter ...

This panel cutter is used to make a 5 degree face cut on 5/8 inch panels alone, or 3/4 inch panels when combined with our DC2300 or DC2325 undercut...

This panel cutter is used to make a 5 degree face cut on 5/8 inch panels alone, or 3/4 inch panels when combined with our DC2300 or DC2325 undercut...

Used to make 90 degree V-groove edges A = 2-3/4 Inch Cutter Diameter B = 1 Inch Cutting Length 3/4 Inch Bore Diameter 5,000-10,000 RPM Manufac...

Make cove and bead edges A = 3-1/4 Inch Cutter Diameter B = 7/8 Inch Cutting Length r = 3/8 Inch Radius 3/4 Inch Bore Diameter 5,000-10,000 RP...

Used to make decorative edges, this industrial quality shaper cutter also doubles as a 5/16 cove and 3/8 inch beading cutter. Manufactured with 3 m...

Used to make cove and bead edges A = 2-7/8 Inch Cutter Diameter B = 11/16 Inch Cutting Length r = 5/16 Inch Radius 3/4 Inch Bore Diameter 5,00...

Used to make decorative edges, this industrial quality shaper cutter also doubles as a 5/16 inch quarter round and 1/2 inch cove cutter. Manufactur...

Used to make beaded edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A = 2-5/8 Inch Cutter Diameter B = ...