Products

Support flexible hose anywhere with these 2-5/16" Hose Hangers Fasteners not included

2" Diameter Steel Band construction Connect flexible piping to dust hoods, blast gates and fittings Screwdriver adjustable

These 10" diameter 220 grit aluminum oxide sanding discs are sized to fit most common disc sanders including hand-held orbitals and are sold in a ...

These 9" diameter 120 grit aluminum oxide sanding discs are sized to fit most common disc sanders including hand-held orbitals and are sold in a 2...

These 9" diameter 150 grit aluminum oxide sanding discs are sized to fit most common disc sanders including hand-held orbitals and are sold in a 2...

These 9" diameter 220 grit aluminum oxide sanding discs are sized to fit most common disc sanders including hand-held orbitals and are sold in a 2...

These 12" diameter 150 grit aluminum oxide sanding discs are sized to fit most common disc sanders including hand-held orbitals and are sold in a ...

These 12" diameter 80 grit aluminum oxide sanding discs are sized to fit most common disc sanders including hand-held orbitals and are sold in a 2...

Quick and easy to setup Uses standard 2 x 4 lumber for the legs Top piece can be 2 x 4, 2 x 6, or wider Includes two brackets for one sawhorse ...

Narrow end O.D. fits Woodstock W2049 Mini Dust Collection Separator Lid or Shopvac hose receptacles Wide end O.D. fits 2-1/2" dust collection hose...

Hose clamps are used to connect flexible piping to dust hoods, blast gates and fittings. 2-1/2" Diameter Steel Band

90 degree elbow 2-1/2" OD Fits most larger shop-vacuum type hose for use as a stationary dust collection system

Size: 2-1/2" OD Connect hose sections for longer runs Fits most larger shop-vacuum type hose for use as a stationary dust collection system ABS ...

2-1/2" x 2-1/2" x 2-1/2" Fits most larger shop-vacuum type hose for use as a stationary dust collection system

Reduce dust collection hose from 2-1/2" to 1" OD in 1-7/8", 1-1/2" and 1-1/4" OD steps Simply cut off what you don't need Flange measures 2-7/8"...

Angled Y provides less air resistance than a 90 Degree Tee fitting 2-1/2" x 2-1/2" x 2-1/2" OD Fits most larger shop-vacuum type hose for use as...

Collect chips and dust right at the router table Low profile won't interfere with production Easily mounts to router table or shaper table Port...

Collect chips and dust right at the router table Easily mounts to router table or shaper table Port size measures 2-1/2" ID and 2-11/16" OD

Flanged connector makes adding a 2-1/2" dust port to any machine easy Simply cut a 2-3/4" diameter hole and mount the connector Flange diameter ...

Fits over a 3" hole Has a flange added so it can attach directly to any machine. Easy connection between the machine and a home shop vacuum It c...

2-1/2" Diameter Wire

Reduce from 2-1/2" hose to 1-1/4" OD hose Tapered sides for friction fit

Tapered male end for press-on fit Threaded end fits 2-1/2" OD flexible hose Ideal for quick connection to 2-1/2" ID machine dust ports

Use it in conjunction with our 4" blast gate (W1007) to clean up floor messes. Sweep dust in, and it's gone. Close the blast gate when the floor s...