Products

Replacement Cutter for DC1665 Tongue and Groove Kit For Router Table Use

Make Stile and Rail cabinet door frames using one of these popular profiles. This one bit has all that is needed to make both the stile and the rai...

These unique tongue and groove bits provide a large surface area for the tightest joints possible. Just set the bit once and reverse the mating edg...

These high quality Router Bit Bearings stand up to heavy use and can be used with other manufacturers bits. 1/2-inch Outside diameter by 3/8-inch I...

These high quality Router Bit Bearings stand up to heavy use and can be used with other manufacturers bits. 10mm Outside diameter by 5mm Inside di...

These high quality Router Bit Bearings stand up to heavy use and can be used with other manufacturers bits. 16mm Outside diameter by 5mm Inside di...

Used to make full beaded edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. 5,000- 10,000 RPM. A = 2-5/8 In...

This panel cutter is used to make a 15 degree face cut on 5/8 inch panels alone, or 3/4 inch panels when combined with our DC2300 or DC2325 undercu...

Used to make full beaded edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. 5,000- 10,000 RPM. A = 2-5/8 In...

This panel cutter is used to make a 5 degree face cut on 5/8 inch panels alone, or 3/4 inch panels when combined with our DC2300 or DC2325 undercut...

Used to make 90 degree V-groove edges A = 2-3/4 Inch Cutter Diameter B = 1 Inch Cutting Length 3/4 Inch Bore Diameter 5,000-10,000 RPM Manufac...

Used for cutting laminate quickly and neatly. Produces a flush trim Self piloted design eliminates the time and expense to maintain ball bearing gu...

Used for cutting laminate quickly and neatly. Produces a flush trim Self piloted design eliminates the time and expense to maintain ball bearing gu...

Used to make cabinet door edges with built-in finger pulls, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A =...

A = 3-1/8 Inch Cutter Diameter B = 1-3/4 Inch Cutting Length w = 5/8 Inch Cutting Width r = 1/4 Inch Radius 3/4 Inch Bore Diameter

Stile and Rail set Quarter Bead for passage doors. A = 2-7/8 Inch Cutter Diameter B = 1-3/8 Inch Cutting Length w = 1/2 Inch Cutting Width r = ...

This bit creates slot wall panels for commercial displays or makes custom hold-downs for your shop jigs. A = 1 Inch Cutter Diameter B = 7/8 Inch ...

Used alone or in conjunction with our Panel Cutters, these Carbide-tipped undercutters mill thicker raised panels to a standard 1/4 inch to match s...

2 Ton Working Load Capacity Rope Length: 65' x 3/8" 7 to 1 Lifting Power Drop Forged and Zinc Plated Eye Sling Hooks and Clip Rugged 2.5" Nylon Pu...

3/4-inch Outside diameter by 1/4-inch Inside diameter High quality construction Bearing Router Bit

This high quality Router bit Bearings stand up to heavy use and can be used with other manufacturer's bits. Bits can use different sizes so make su...

1/2" x 25' x 1/2" Oil Resistant Red Rubber Air Hose. Size: 1/2" x 25' x 1/2" Abrasion resistant Works with temperature range from 5 degree F to 122...

Classic all-rubber mallet head with non-splinter fiberglass handle Textured PVC grip for firm hold even when exposed to fluids Preferred by p...

Quality 100% Polyester Tricot Material With 2 Pockets Class 2 Safety Vest With Zipper Closure Hi-Visibility Reflective Tape ANSI / ISEA Approved 0...