Dust Collection Fittings and Adapters

This 3" Quick Coupler make dust collection set-up easy. 3" OD dust collection hose 3" ID dust collection fitting.

Reduce dust collection hose from 2-1/2" to 1" OD in 1-7/8", 1-1/2" and 1-1/4" OD steps Simply cut off what you don't need Flange measures 2-7/8"...

Increase air velocity by reducing from 4" OD to 2-1/2" OD Tapered ends for press-on fit

Connect 4" hose to 2" hose Ends are 4" OD and 2" OD. Tapered transition for maximum efficiency Heavy wall thickness stands up to hose clamp pres...

T-fittings provide the option of adding branches to a system to service each machine in a shop. T's are very helpful when space or design constrain...

Elbows are necessary whenever ductwork changes direction, such as from a dust collector to an overhead main line, or when connecting individual mac...

Connects full sections of hose for longer runs or to utilize short sections 4" Outside Diameter ABS Plastic

Increases air velocity near the machine where it's needed most 3" and 2" Outside Diameters ABS Plastic

Provides a step down from a larger main line to smaller branch lines which increases air velocity near the machine where it's needed most 5" &...

Attach to a 4" flexible hose and connect to 4" outer diameter dust hood Ideal for use with smaller capacity, mobile dust collectors to service mul...

4" OD 4-5/8" x 4-5/8" flange Pre-drilled flange mounting holes

Reduce from 4" hose to 2-1/4" OD hose Off center alignment keeps dust from collecting in the system Heavy wall thickness stands up to hose clamp...

Size: 2-1/2" OD Connect hose sections for longer runs Fits most larger shop-vacuum type hose for use as a stationary dust collection system ABS ...

90 degree elbow 2-1/2" OD Fits most larger shop-vacuum type hose for use as a stationary dust collection system

Sized for 5 gallon buckets 2-1/2" OD ports fit most shop vacuum hose Use in conjunction with shop vacuums for capturing more dust

4" OD dust port with built-in guard for large pieces Hood measures 13-9/16" long x 7-5/16" wide Mounting flange has pre-bored holes Distance bet...

Tapered male end for press-on fit Threaded end fits 2-1/2" OD flexible hose Ideal for quick connection to 2-1/2" ID machine dust ports

Swivel Joint provides flexibility in duct layout 4" OD x 2-1/2" OD hose connection Swivel design allows up to 20 Degree direction change

Reduce dust collection hose from 4" to 1" OD in 2-3/4", 2-3/8 and 1-7/8" OD steps Simply cut off what you don't need Heavy wall thickness stands...

2-1/2" OD connection 2-1/8" x 3/4" oval nozzle ABS Plastic

Tapered male end for press-on fit Threaded end fits 4" OD flexible hose Ideal for quick connection to 4" ID machine dust ports

Fits over a 6-1/2 inch X 6-1/2 inch chute Attach with screws or double-sided tape 4" Outside Diameter 3/4" Wide Flange ABS Plastic

Y's are used to attach branch lines to service more than one machine Design provides increased lateral air flow and efficiency over other types of...

Elbows are necessary whenever ductwork changes direction, such as from a dust collector to an overhead main line, or when connecting individual mac...