Dust Collection Fittings and Adapters

Collect chips and dust right at the router table Low profile won't interfere with production Easily mounts to router table or shaper table Port...

Flanged connector makes adding a 4" OD dust port to any machine easy Simply cut a 4" diameter hole and mount the connector Flange diameter is 5-...

Y's are used to attach branch lines to service more than one machine This design provides increased lateral air flow and efficiency over other typ...

Blast gate directs air flow for multiple machine duct systems Fits most larger shop-vacuum type hose for use as a stationary dust collection syst...

Tapered female end for press-on fit Threaded end fits 4" flexible hose Ideal for quick connection to 5" machine dust ports

Increase air velocity by reducing from 4" OD to 2-1/2" OD Tapered ends for press-on fit

This 4" OD Splice Right Thread To Taper fitting make dust collection set-up easy 4" dust collection hose 4" dust port Eases dust collection set-up

Elbows are necessary whenever ductwork changes direction, such as from a dust collector to an overhead main line, or when connecting individual mac...

Narrow end O.D. fits Woodstock W2049 Mini Dust Collection Separator Lid or shopvac hose receptacles Wide end O.D. fits 2-1/2" dust collection hos...

Pick up free dust in your shop with this dust collection accessoriese kit. This kit features simple connection to your dust collection system with ...

These fittings provide a step down from a larger main line to smaller branch lines. This step-down increases air velocity near the machine where it...

4" OD 4-5/8" x 4-5/8" flange Pre-drilled flange mounting holes

2-1/2" x 2-1/2" x 2-1/2" Fits most larger shop-vacuum type hose for use as a stationary dust collection system

4" x 2-1/2" 2-1/2" ID dust collection hose 4" OD dust collection fitting

90 degree elbow 2-1/2" OD Fits most larger shop-vacuum type hose for use as a stationary dust collection system

Easily route dust collection from hard-to-reach areas with the Woodstock 4" Angle Dust Collection Port. This right-angle design allows flexible pla...

Sized for 5 gallon buckets 2-1/2" OD ports fit most shop vacuum hose Use in conjunction with shop vacuums for capturing more dust

4" OD dust port with built-in guard for large pieces Hood measures 13-9/16" long x 7-5/16" wide Mounting flange has pre-bored holes Distance bet...

Tapered male end for press-on fit Threaded end fits 2-1/2" OD flexible hose Ideal for quick connection to 2-1/2" ID machine dust ports

Swivel Joint provides flexibility in duct layout 4" OD x 2-1/2" OD hose connection Swivel design allows up to 20 Degree direction change

Reduce dust collection hose from 4" to 1" OD in 2-3/4", 2-3/8 and 1-7/8" OD steps Simply cut off what you don't need Heavy wall thickness stands...

45 degree direction change for building 4" OD dust collection systems Heavy wall thickness stands up to hose clamp pressure

2-1/2" OD connection 2-1/8" x 3/4" oval nozzle ABS Plastic

Tapered male end for press-on fit Threaded end fits 4" OD flexible hose Ideal for quick connection to 4" ID machine dust ports