Dust Collection Fittings and Adapters

Flanged connector makes adding a 4" OD dust port to any machine easy Simply cut a 4" diameter hole and mount the connector Flange diameter is 5-...

Collect chips and dust right at the router table Easily mounts to router table or shaper table Port size measures 2-1/2" ID and 2-11/16" OD

4" OD port Hood measures 16-1/4" long x 12-3/4" wide Great for capturing dust from portable power tools

4" OD dust port Hood measures 8" x 7-3/4" with flip-up front guard Universal mounting hardware adapts to most lathes

Blast gate directs air flow for multiple machine duct systems Fits most larger shop-vacuum type hose for use as a stationary dust collection syst...

Angled Y provides less air resistance than a 90 Degree Tee fitting 2-1/2" x 2-1/2" x 2-1/2" OD Fits most larger shop-vacuum type hose for use as...

Elbows are necessary whenever ductwork changes direction, such as from a dust collector to an overhead main line, or when connecting individual mac...

These fittings provide a step down from a larger main line to smaller branch lines. This step-down increases air velocity near the machine where it...

2-1/2" x 2-1/2" x 2-1/2" Fits most larger shop-vacuum type hose for use as a stationary dust collection system

4" x 2-1/2" 2-1/2" ID dust collection hose 4" OD dust collection fitting

Collect chips and dust right at the router table Low profile won't interfere with production Easily mounts to router table or shaper table Port...

Swivel Joint provides flexibility in duct layout 4" OD x 2-1/2" OD hose connection Swivel design allows up to 20 Degree direction change

Reduce dust collection hose from 4" to 1" OD in 2-3/4", 2-3/8 and 1-7/8" OD steps Simply cut off what you don't need Heavy wall thickness stands...

45 degree direction change for building 4" OD dust collection systems Heavy wall thickness stands up to hose clamp pressure

Splice 4" spiral flexible hose to solid round pipe 3-13/16" ID x 4" OD round end Threaded end twists inside flexible hose for a secure fit

4" Outside Diameter 3/4" Wide Flange ABS Plastic Attach with screws or double-sided tape

T-fittings provide the option of adding branches to a system to service each machine in a shop. T's are very helpful when space or design constrain...

Elbows are necessary whenever ductwork changes direction, such as from a dust collector to an overhead main line, or when connecting individual mac...

Increases the efficiency and capacity of standard dust collection systems Fits securely on top of a standard 30-gallon metal trash can Molded ABS ...

Tapered female end for press-on fit Threaded end fits 4" flexible hose Ideal for quick connection to 5" machine dust ports

Increase air velocity by reducing from 4" OD to 2-1/2" OD Tapered ends for press-on fit

This 4" OD Splice Right Thread To Taper fitting make dust collection set-up easy 4" dust collection hose 4" dust port Eases dust collection set-up

Narrow end O.D. fits Woodstock W2049 Mini Dust Collection Separator Lid or Shopvac hose receptacles Wide end O.D. fits 2-1/2" dust collection hose...

Pick up free dust in your shop with this dust collection accessoriese kit. This kit features simple connection to your dust collection system with ...