Lathes, Jointers & Routers

Used to make locking 45 degree miter joints, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. 5,000- 10,000 RPM. ...

Now you can create handrails in any wood variety that you choose right in your own shop. Cutters can also be used separately to create interesting ...

2 Piece set, includes DC2005 and DC2006. Used to make tongue and groove edge profiles, these industrial quality shaper cutters are manufactured wit...

5,000- 10,000 RPM Used to make tongue and groove profiles A = 2-5/8 Inch Cutter Diameter B = 1 Inch Cutting Length C = 3/8 Inch Tongue Height W...

1HP, 110v, Single-Phase Range of Speeds: 150, 300, 560, 720, 1200, 2400 RPM 1" Spindle Bore 5" 3-Jaw Chuck w/ 2 Sets of Jaws 6-1/2" 4-Jaw Chuc...

2 HP, 110V, single-phase Swing over bed: 16" Maximum distance between centers: 46" 1" x 8 TPI RH headstock spindle MT2 spindle & tailstock tap...

The oversized fence on this 6" Jointer provides tremendous control for edge jointing wider boards. The fine adjust handwheel dials in the outfeed t...

3/4 HP, 110v, Single-Phase 130 - 2,000 RPM 4" 3-Jaw Chuck with Two Sets of Jaws 7-1/4" 4-Jaw Chuck with Reversible Jaws Steady Rest Follow Re...

Sick of fussing with your pocket hole machine's hold-down clamp? Our new pocket hole machine has a patented "NO ADJUST" hold-down clamp There has...

110V 60Hz, 370W Motor Variable Speed: Four Settings Between 500 to 3,150rpm Swing Over Bed: 10" (254 mm) Distance Between Centers: 18" (457 mm) Dr...

Extends the bed length of the W1836 Wood Lathe to 40-7/8 inches between centers This piece gives you the capacity of a larger lathe at a fraction ...