Lathes, Jointers & Routers

Allows you to position your shaper cutter or cutters anywhere on the spindle Use them between cutters or stack them above the cutter to bear agai...

Spacers allow you to position your shaper cutter or cutters anywhere on the spindle. Use them between cutters or stack them above the cutter to bea...

Spacers allow you to position your shaper cutter or cutters anywhere on the spindle. Use them between cutters or stack them above the cutter to bea...

This T-Bushing is absolutely indispensable when working with shaper cutters. 3/4" Inside Diameter 1" Outside Diameter 1/4" Shank Height 3/8" Ov...

3/4" Inside Diameter 1-1/4" Outside Diameter 1/4" Shank Height 3/8" Overall Height

Spacers allow you to position your shaper cutter or cutters anywhere on the spindle. Use them between cutters or stack them above the cutter to bea...

Spacers allow you to position your shaper cutter or cutters anywhere on the spindle. Use them between cutters or stack them above the cutter to bea...

Use them between cutters or stack them above the cutter to bear against the spindle nut 1-1/4" Inside Diameter 1-3/4" Outside Diameter 1" Overal...

Spacers allow you to position your shaper cutter or cutters anywhere on the spindle. Use them between cutters or stack them above the cutter to bea...

All Woodstock Rub Collars are manufactured from solid steel on CNC lathes. We assemble these in the U.S.A. using high-quality, maintenance-free bea...

1" Inside Diameter 1/2" Overall Height 3/8" Overall Height

Spacers allow you to position your shaper cutter or cutters anywhere on the spindle. Use them between cutters or stack them above the cutter to bea...

Spacers allow you to position your shaper cutter or cutters anywhere on the spindle. Use them between cutters or stack them above the cutter to bea...

Position your shaper cutter or cutters anywhere on the spindle Stack them above the cutter to bear against the spindle nut 3/4" Inside Diameter 1...

This T-Bushing is absolutely indispensable when working with shaper cutters. 1" Inside Diameter 1-1/4" Outside Diameter 1/4" Shank Height 3/8" ...

This T-Bushing is absolutely indispensable when working with shaper cutters. 1/2" Inside Diameter 3/4" Outside Diameter 3/16" Shank Height 5/16...

Keeps knives in perfect alignment every time Accuracy to within +- .001" Shift nicked knives to get perfect cuts For 4" - 8" Jointers w/ HSS Kniv...

All Woodstock Rub Collars are manufactured from solid steel on CNC lathes. We assemble these in the U.S.A. using high-quality, maintenance-free bea...

1/2" Inside Diameter 3/4" Outside Diameter 7/16" Overall Height

Turns vertical spindle on your multi-speed drill press Easy setup means quick change over from drill press mode to lathe mode A 12" tool rest all...

Red plastic switch cover is a removable key to lock switch in the OFF position when not in use Mounts directly to the Rebel router table or any wo...

Used to make decorative half round edges, this industrial quality shaper cutter is manufactured with 2mm thick C-2 carbide, 7,000-13,200 RPM. 1/2 ...

Used to make rabbet or slot cuts for inserting panels or grass into framework. This industrial quality shaper cutter is manufactured with 2mm thick...

Used to make decorative edges, this industrial quality shaper cutter is manufactured with 2mm thick C-2 carbide. 7000-13,200 RPM. A = 2 Inch Cutte...