Lathes, Jointers & Routers

Red plastic switch cover is a removable key to lock switch in the OFF position when not in use Mounts directly to the Rebel router table or any wo...

Used to make decorative half round edges, this industrial quality shaper cutter is manufactured with 2mm thick C-2 carbide, 7,000-13,200 RPM. 1/2 ...

Used to make rabbet or slot cuts for inserting panels or grass into framework. This industrial quality shaper cutter is manufactured with 2mm thick...

Used to make decorative edges, this industrial quality shaper cutter doubles as a roundover cutter and a 45 degree chamfer cutter. Made from 2mm C-...

Used to make locking glue joints, this industrial quality shaper cutter is manufactured with 2 mm thick C-2 carbide. 5,000- 10,000 RPM for 3/4 inch...

Now you can create handrails in any wood variety that you choose right in your own shop. Cutters can also be used separately to create interesting ...

Used to make cabinet door edges with built-in finger pulls, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A =...

Used to make full beaded edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. 5,000- 10,000 RPM. A = 2-5/8 In...

This panel cutter is used to make a 15 degree face cut on 5/8 inch panels alone, or 3/4 inch panels when combined with our DC2300 or DC2325 undercu...

This panel cutter is used to make a 5 degree face cut on 5/8 inch panels alone, or 3/4 inch panels when combined with our DC2300 or DC2325 undercut...

Used to make 90 degree V-groove edges A = 2-3/4 Inch Cutter Diameter B = 1 Inch Cutting Length 3/4 Inch Bore Diameter 5,000-10,000 RPM Manufac...

Used to make cabinet door edges with built-in finger pulls, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A =...

A = 3-1/8 Inch Cutter Diameter B = 1-3/4 Inch Cutting Length w = 5/8 Inch Cutting Width r = 1/4 Inch Radius 3/4 Inch Bore Diameter

Stile and Rail set Quarter Bead for passage doors. A = 2-7/8 Inch Cutter Diameter B = 1-3/8 Inch Cutting Length w = 1/2 Inch Cutting Width r = ...

Used alone or in conjunction with our Panel Cutters, these Carbide-tipped undercutters mill thicker raised panels to a standard 1/4 inch to match s...

Self-centering scroll type chuck with reversible jaws 2" diameter 3-jaw Includes MT #1 and MT #2 arbors and wrenches

Cast iron construction Variable speed motor 1/3 HP, 2 Amp, 110V, Single-phase, 60 HZ Includes Safety paddle switch 700 - 3,200 RPM spindle speed...

This Clamping Kit fits our Shop Fox 6" x 10" Mini-Lathe. Fits M1015 4 Clamps 4 Studs 4 Flat Washers 4 Hex Bolts 8 Hex Nuts

2-3/4" diameter 4 slots for 1/4" studs Mounting clamps, t-nuts & bolts included 9/16" center hole Use on 3" or 4" rotary table Chuck jaws...

This MT #1 Live Center fits our Shop Fox 6" x 10" Mini-Lathe. Fits M1015 MT1

24" Wide 36" Long 1/8" Thick Black Neoprene Rubber lasts 10 times as long as the cheap woven pads

This Template Guide Adapter fits Bosch 1600, 1601, 1602, 1603, 1604, 1606, 1611, 1611EVS, 1615 and 1615EVS routers and allows the use of our D3117 ...

This Thread Cutting Kit fits our Shop Fox 6" x 10" Mini-Lathe. Fits M1015

5" 3-Jaw Scroll 1.18" Bore Plain Back 2 Sets of Jaws Wrench & Mounting Screws Included