Sheet Metal Brake & Metal Bender

Round dies: 1", 1 1/4", 1 1/2", 1 3/4", 2", 2 1/2" and 3" 5/8" Round or square solid rod capacity 5/16" x 1-1/4" or 1/4 x 2" Mild Steel Flat Stock...

Metal Alloy Construction 3/4" Thin Wall 1/2" Rigid 2 Bubble Levels Bend Position Marks at: 10, 22, 30, 45, 60 and 90 degrees

High quality steel construction Easily makes up to 90 degree bends Bends material up to 30" Bends material up to 17 gauge mild sheet steel Designe...

Bends 1/2" to 2" Thick Round or Square Solid Rods Bending Bars Can Be Adjusted From 8-1/2" to 22-1/4" Jack Capacities: 13-1/4" Minimum, 22-3/4" Ma...

Bends mild sheet steel up to 12 gauge (2 mm) Maximum bend width: 36" Bend angle capacity: 0 - 120 degrees Includes stand Operating and assembly in...

Bends 1/2" to 3" Thick Round or Square Solid Rods Bending Bars Can Be Adjusted From 8-1/2" to 27" Jack Capacities: 13-1/4" Minimum, 22-3/4" Maximu...

Diameter Range: 1/4", 5/16", 3/8" Marked Degrees Gauge Accurate Angles to 180 Degree Bends aluminum, copper and steel tube

7 Dies, 7 Rollers, Base, Clamp and extending handle Bends round pipe and tubing (Outer diameter): 3/8" (radius 2"), 1/2" (radius 2 3/8"), 9/16" (r...

Bend width: 48" Brake Range: 0 - 135 degrees 3" Max. Pan/Box height Mild Steel: 16 ga. half width - 18 ga. full width Aluminum: 11 ga. Brass / Cop...