Tool Accessories

1/8" Solid Carbide Spiral Cutter Alignment Pin slide on the bushing to rout the cutout and then remove the bushing to cut the perfectly matched i...

43 pc 3 x 12mm Wood Screws 3 pc 2 4 x 20mm Wood Screws 10 pc 5 x 25mm Wood Screws 32 pc 3 x 12mm Sheet Metal Screws 26 pc 3 x 20mm Sheet Metal Scr...

50 pcs of #6 Flat and 50pcs #6 Lock 40 pcs #8 Flat and 40pcs #8 Lock 30 pcs #10 Flat and 30pcs #10 Lock 25 pcs 1/4" Flat and 25pcs 1/4" Lock 15 pc...

60 Pound High Carbon Steel and Heat Treated 20 pcs 5/8" 20 pcs 3/4" 20 pcs 7/8" 30 pcs 1/16" 30 pcs 1/8" 40 pcs 3/16" 40 pcs 1/2" 50 pcs 1/4" 50pc...

Heat-treated steel T-Slot Nuts with black oxide finish Imperfect thread in the base of the T-nut eliminates any danger of screwing the clamping st...

12-10 gauge: 4- Ring 55-5, 4- Ring 55-8, 4- Ring 55-10, 5- Male connect, 5- Female disconnect, 12- Butt connect 22-18 gauge: 8- Ring terminal 1.25...

150 pc Wing Nut Assortment 30 pc M5 X 0.8mm 30 pc M5 X 0.5mm 25 pc M6 X 1mm 25 pc M6 X 0.75mm 20 Pc M8 X 1.75mm 20 pc M8 X 1mm

Very strong magnet that is easily activated with a convenient switch Mounts at any angle and has a fine-adjustment arm Fine adjustment arm for imp...

These T-Nuts allow our W1104 Yellow Board Buddies to fit Craftsman and Rigid tablesaw fences. Sold in pairs. Set of 2

1/4" x 1-1/4" (1) 1/4" x 1-1/2" (2) 1/4" x 2" (1) 5/16" x 1" (1) 5/16" x 1-1/4" (1) 5/16" x 1-1/2" (2) 5/16" x 2" (2) 5/16" x 2-1/4" (2) 5/16" x 2...

Brass guide bushings with fine threads are designed to follow and template for perfectly matched multiples 5/16" O.D. - 1/4" I.D. 3/8" O.D. - 9/3...

150 pieces size #0 125 pieces size #10 100 pieces size #20 Glue bottle Glue applicator for biscuit slots Glue roller for flat surfaces

This 6-Piece stainless steel Tweezer Set includes every shape and size needed for the workshop including blunt tip, tapered point, fine-tipped bent...

Increase your W1706 Shop Fox 14" Bandsaw's cutting capacity to 12" high with this bolt-on 6" extension block kit. Comes with instructions and requi...

Includes turning holder, turning/boring bar holder, 1/2" boring bar holder, parting tool holder with cut-off blade, and knurling tool with interch...

1-1/2" Diameter 4-1/4" Long 150 grit Aluminum Oxide Sold in 3 pack Fits D2677 Sanding Drum

Air flow to each machine is controlled by a blast gate. Kit comes complete with comprehensive instructions and can be expanded even further using ...

Our basic Dust Collection Kit contains everything needed for a single machine hookup, including simple and concise instructions. 1 - 4" x 10 ft. B...

Case hardened blocks, bolts, nuts and hold-downs. Clamping Kit includes: 24 studs, 6 step block pairs, 6 T-nuts, 6 flange nuts, 4 coupling nuts and...

24 3/8" Studs 6 Pairs of Step Blocks 6 1/2" T-Nuts 6 Flange Nuts 4 Coupling Nuts 6 End Hold-Downs Racks can be mounted to the wall for side ...

These R-8 Collets are precision ground to very close tolerances. R-8 1/8" 3/16" 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4" 7/8"

Drill the center of stock up to 1-3/8" thick with this automatic Centering Jig. Simply insert the appropriate size bushing in the jig, straddle th...

(30) #8 x 1/2" (30) #8 x 5/8" (30) #8 x 3/4" (30) #8 x 1" (20) #10 x 1/2" (20) #10 x 5/8" (20) #10 x 3/4" (20) #10 x 1" Convenient re-sealable pla...

M4 25 pieces M5 25 pieces M6 20 pieces M8 15 pieces M10 10 pieces M12 5 pieces Nylon inserts prevent loosening Convenient re-sealable plastic case