Dust Collection Fittings and Adapters

We engineered the inside diameter of the 2-1/2" side of each of these fittings to duplicate the 2-1/2" opening on your shop vacuum. Insert the shop...

Fast, Secure Connections for 3" Dust Collection Systems Simplify your dust collection setup with the Woodstock D4230 3" Quick Coupler. Designed for...

Flanged connector makes adding a 2-1/2" dust port to any machine easy Simply cut a 2-3/4" diameter hole and mount the connector Flange diameter ...

Used to connect full sections of hose for longer runs or to utilize short sections 3" Outside Diameter ABS Plastic

T-fittings provide the option of adding branches to a system to service each machine in a shop. T's are very helpful when space or design constrain...

Swivel Joint provides flexibility in duct layout 4" OD x 4" OD hose connection Swivel design allows up to 20 Degree direction change ABS Plastic

Size: 2-1/2" OD Connect hose sections for longer runs Fits most larger shop-vacuum type hose for use as a stationary dust collection system ABS ...

Tapered female end for press-on fit Threaded end fits 4" flexible hose Ideal for quick connection to 4" machine dust ports

This Quick Coupler make dust collection set-up easy. 4" x 3" 3" ID dust collection hose 4" OD dust collection fitting

Fits over a 3" hole Has a flange added so it can attach directly to any machine. Easy connection between the machine and a home shop vacuum It c...

Connect 4" hose to 2" hose Ends are 4" OD and 2" OD. Tapered transition for maximum efficiency Heavy wall thickness stands up to hose clamp pres...

Connects full sections of hose for longer runs or to utilize short sections 4" Outside Diameter ABS Plastic

Increases air velocity near the machine where it's needed most 3" and 2" Outside Diameters ABS Plastic

Provides a step down from a larger main line to smaller branch lines which increases air velocity near the machine where it's needed most 5" &...

Reduce from 4" hose to 2-1/4" OD hose Off center alignment keeps dust from collecting in the system Heavy wall thickness stands up to hose clamp...

Reduce from 2-1/2" hose to 1-1/4" OD hose Tapered sides for friction fit

Y's are used to attach branch lines to service more than one machine This design provides increased lateral air flow and efficiency over other typ...

Engineered to duplicate the opening on your shop vacuum. Insert the shop vacuum hose directly to the fitting. The outside diameters match our stan...

Collect chips and dust right at the router table Easily mounts to router table or shaper table Port size measures 2-1/2" ID and 2-11/16" OD

Angled Y provides less air resistance than a 90 Degree Tee fitting 2-1/2" x 2-1/2" x 2-1/2" OD Fits most larger shop-vacuum type hose for use as...

Reduce dust collection hose from 2-1/2" to 1" OD in 1-7/8", 1-1/2" and 1-1/4" OD steps Simply cut off what you don't need Flange measures 2-7/8"...

Mount 2-1/2" to 6" blast gates to any solid surface Provides blast gate stability for ease of use Simple blast gate attachment Includes mountin...

Step-down increases air velocity near the machine where it's needed most 4" & 3" Outside Diameters ABS Plastic

Attach to a 4" flexible hose and connect to 4" outer diameter dust hood Ideal for use with smaller capacity, mobile dust collectors to service mul...