Lathes, Jointers & Routers

This panel cutter is used to make a 15 degree face cut on 5/8 inch panels alone, or 3/4 inch panels when combined with our DC2300 or DC2325 undercu...

Used to make full beaded edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. 5,000- 10,000 RPM. A = 2-5/8 In...

This panel cutter is used to make a 5 degree face cut on 5/8 inch panels alone, or 3/4 inch panels when combined with our DC2300 or DC2325 undercut...

Used to make 90 degree V-groove edges A = 2-3/4 Inch Cutter Diameter B = 1 Inch Cutting Length 3/4 Inch Bore Diameter 5,000-10,000 RPM Manufac...

This panel cutter is used to make an Ogee cut on 5/8 inch panels alone, or 3/4 inch panels when combined with our DC2300 or DC2325 undercutters. Th...

Used to make the bull nose on landing treads and stair treads, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. 5...

Used to make cabinet door edges with built-in finger pulls, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A =...

A = 3-1/8 Inch Cutter Diameter B = 1-3/4 Inch Cutting Length w = 5/8 Inch Cutting Width r = 1/4 Inch Radius 3/4 Inch Bore Diameter

Stile and Rail Set Ogee for cabinet doors. A = 2-5/8 Inch Cutter Diameter B = 7/8 Inch Cutting Length w = 3/8 Inch Cutting Width r = 3/16 Inch ...

Stile and Rail set Quarter Bead for passage doors. A = 2-7/8 Inch Cutter Diameter B = 1-3/8 Inch Cutting Length w = 1/2 Inch Cutting Width r = ...

Stile and Rail set Quarter Round for cabinet doors. A = 2-5/8 Inch Cutter Diameter B = 7/8 Inch Cutting Length w = 3/8 Inch Cutting Width r = 1...

Stile and Rail set Roman Ogee for cabinet doors. A = 3-1/2 Inch Cutter Diameter B = 7/8 Inch Cutting Length w = 3/8 Inch Cutting Width 1-1/4 In...

Stile and Rail set Roman Ogee for cabinet doors. A = 2-5/8 Inch Cutter Diameter B = 7/8 Inch Cutting Length w = 3/8 Inch Cutting Width r = 1/4 ...

2 Piece set, includes DC2005 and DC2006. Used to make tongue and groove edge profiles, these industrial quality shaper cutters are manufactured wit...

5,000- 10,000 RPM Used to make tongue and groove profiles A = 2-5/8 Inch Cutter Diameter B = 1 Inch Cutting Length C = 3/8 Inch Tongue Height W...

Used alone or in conjunction with our Panel Cutters, these Carbide-tipped undercutters mill thicker raised panels to a standard 1/4 inch to match s...

Aluminum and steel design with built-in guard Master power switch located in the front of router Built in scale for accurate indexing Push out poc...

1HP, 110v, Single-Phase Range of Speeds: 150, 300, 560, 720, 1200, 2400 RPM 1" Spindle Bore 5" 3-Jaw Chuck w/ 2 Sets of Jaws 6-1/2" 4-Jaw Chuc...

Motor: 2HP, 240V, single-phase, TEFC, 3450 RPM Amps: 10.8 Power transfer: V-belt Overall dimensions: 36-1/4"L x 22"W x 34-1/2"H Maximum planing wi...

Self-centering scroll type chuck with reversible jaws 2" diameter 3-jaw Includes MT #1 and MT #2 arbors and wrenches

Fits M1015 6" x 10" Mini-Lathe Reversible Jaws

Cast iron construction Variable speed motor 1/3 HP, 2 Amp, 110V, Single-phase, 60 HZ Includes Safety paddle switch 700 - 3,200 RPM spindle speed...

This Clamping Kit fits our Shop Fox 6" x 10" Mini-Lathe. Fits M1015 4 Clamps 4 Studs 4 Flat Washers 4 Hex Bolts 8 Hex Nuts

2-3/4" diameter 4 slots for 1/4" studs Mounting clamps, t-nuts & bolts included 9/16" center hole Use on 3" or 4" rotary table Chuck jaws...