Lathes, Jointers & Routers

Tongue and groove are below center A = 2-5/8 Inch Cutter Diameter B = 1 Inch Cutting Length W = 1/2 Inch Cutting Width 3/4 Inch Bore Diameter

2 Piece set, includes DC2005 and DC2006. Used to make tongue and groove edge profiles, these industrial quality shaper cutters are manufactured wit...

5,000- 10,000 RPM Used to make tongue and groove profiles A = 2-5/8 Inch Cutter Diameter B = 1 Inch Cutting Length C = 3/8 Inch Tongue Height W...

Used to make decorative edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A = 2-5/8 Inch Cutter Diameter ...

Used alone or in conjunction with our Panel Cutters, these Carbide-tipped undercutters mill thicker raised panels to a standard 1/4 inch to match s...

1-1/4 Inch Bore Undercutter Perfect for raised panels thicker than 5/8 Inch Spindle not included

Used to make the decorative edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A = 3 Inch Cutter Diameter ...

Used to make tongue and groove edge profiles, these industrial quality shaper cutters are manufactured with 2mm thick C-2 carbide. 7,000- 13,200 RP...

Used to make tongue and groove profiles, these industrial quality shaper cutters are manufactured with 3mm thick C-2 carbide. 5,000- 10,000 RPM. A...

Makes tongue and groove edge profiles Manufactured with 2mm thick C-2 carbide 7,000- 13,200 RPM A = 2 Inch Cutter Diameter B = 1 Inch Cutting Len...

Used to make tongue and groove profiles, these industrial quality shaper cutters are manufactured with 3mm thick C-2 carbide. 5,000- 10,000 RPM. A...

Aluminum and steel design with built-in guard Master power switch located in the front of router Built in scale for accurate indexing Push out poc...

1HP, 110v, Single-Phase Range of Speeds: 150, 300, 560, 720, 1200, 2400 RPM 1" Spindle Bore 5" 3-Jaw Chuck w/ 2 Sets of Jaws 6-1/2" 4-Jaw Chuc...

This 11-Pc. Cutter Set fits our Shop Fox 6" x 10" Mini-Lathe. Fits M1015

2 HP, 110V, single-phase Swing over bed: 16" Maximum distance between centers: 46" 1" x 8 TPI RH headstock spindle MT2 spindle & tailstock tap...

Motor: 2HP, 240V, single-phase, TEFC, 3450 RPM Amps: 10.8 Power transfer: V-belt Overall dimensions: 36-1/4"L x 22"W x 34-1/2"H Maximum planing wi...

2 HP, 120/220V, Single-phase Spindles: 1/2" and 3/4" Spindle travel: 3" Table: 24" x 21" Power cord: 10' x 14 ga. Miter gauge Precision ground cas...

Self-centering scroll type chuck with reversible jaws 2" diameter 3-jaw Includes MT #1 and MT #2 arbors and wrenches

5" straight turning holder, 1/4 x 2-1/2 M2 HSS tool bit 5" left turning holder, 1/4 x 2-1/2 M2 HSS tool bit 6-3/4 Boring Bar, Holder, 1/4 Square x...

Motor: 3 HP, 220V, single-phase with reversing switch Large precision ground cast iron table Table size: 30-1/2" deep x 28-1/4" wide Spindles: ...

This 4" diameter Face Plate fits our Shop Fox 6" x 10" Mini-Lathe. 4" Diameter Fits M1015

Fits M1015 6" x 10" Mini-Lathe Reversible Jaws

This 5 HP Spindle Shaper is sized to handle large raised panel door systems as well as wide moulding profiles. With a full range of standard spindl...

The oversized fence on this 6" Jointer provides tremendous control for edge jointing wider boards. The fine adjust handwheel dials in the outfeed t...