Lathes, Jointers & Routers

Two Piece set includes the DC2217 and DC2218. Now you can create handrails in any wood variety that you choose right in your own shop. Cutters can ...

Used to make the decorative edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A = 3-1/4 Inch Cutter Diamet...

Used to make the decorative edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A = 2-5/8 Inch Cutter Diamet...

Used to make the decorative edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A = 2-7/8 Inch Cutter Diamet...

Used to make decorative edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A = 3 Inch Cutter Diameter B = ...

Used to make the classic Ogee edge, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A = 2-5/8 Inch Cutter Diame...

Used to make the decorative edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A = 2-5/8 Inch Cutter Diamet...

Used to make cabinet door edges with built-in finger pulls, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A =...

Used to make the decorative edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A = 2-5/8 Inch Cutter Diamet...

Used to make quarter rounded edges, this industrial quality shaper cutter provides two cutting radii. Manufactured with 2mm thick C-2 carbide. A =...

Used to make decorative edges, this industrial quality shaper cutter doubles as a 1/8 inch and 3/8 inch quarter round and 1/4 inch beading cutter. ...

Used to make decorative edges, this industrial quality shaper cutter doubles as a 1/8 inch and 3/8 inch quarter round and 1/4 inch beading cutter. ...

Used to make decorative edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. 5,000- 10,000 RPM. A = 3 Inch Cu...

Used to make decorative edges, this industrial quality shaper cutter is also symmetrically ground for edge joining applications. Manufactured with ...

Used to make V-groove paneling, wainscoting, decking and flooring, these industrial quality shaper cutter sets are manufactured with 3 mm thick C-2...

Used to make locking drawer joints, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. 5,000- 10,000 RPM for 3/4 in...

Used to make locking glue joints, this industrial quality shaper cutter is manufactured with 2 mm thick C-2 carbide. 5,000- 10,000 RPM for 3/4 inch...

Manufactured with 3 mm thick C-2 carbide 5,000- 10,000 RPM 2 Bushings and 3 shims included A = 2-1/2 Inch Cutter Diameter B = 1 Inch Cutting Leng...

Used to make raised panel edges with a vertical set-up. This industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. 5,000- 1...

Used to make raised panel edges with a vertical set-up. This industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. 5,000- 1...

Used to make raised panel edges with a vertical set-up. This industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. 5,000- 1...

Used to make the decorative edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A = 2-5/8 Inch Cutter Diamet...

Used to make decorative edges, this industrial quality shaper cutter is manufactured with 3 mm thick C-2 carbide. A = 2-5/8 Inch Cutter Diameter ...

Stile and Rail set Quarter Bead for entry doors. A = 4 Inch Cutter Diameter B = 1-3/4 Inch Cutting Length w = 5/8 Inch Cutting Width r = 1/2 In...